3 Common Curtain Hanging Mistakes (And How to Avoid Them)

Published: 2026-07-21
By: Ray Moore
← Back to Blogs

You’ve picked the perfect curtains, measured the window, and bought a rod that matches your style. Then you hang it, step back, and something feels… off. The fabric pools unevenly, the rod tilts slightly to one side, or the whole setup looks like an afterthought. Curtain hanging looks simple, but a few common mistakes can turn a polished room into a perpetual annoyance. Here are three frequent errors renters make—especially in older homes—and how to fix them before you drill a single hole.

Mistake #1: Ignoring off-center windows and unbalanced pairs. Many Williamsburg apartments and houses have windows that aren’t perfectly centered on a wall, or two windows side by side that sit at slightly different heights. The natural instinct is to center the rod exactly over the window frame. That often leaves the curtain bunched awkwardly against one wall or makes a pair of windows feel lopsided. Instead, step back and look at the whole wall. For an off-center window, extend the rod past the frame on the short side so the curtain stacks evenly. For a pair of windows, mount the rods at the same height—even if that means one bracket sits a bit higher than the frame—so the eye reads symmetry. The goal is visual balance, not mechanical alignment. And if you’re working with heavy blackout curtains, the extra support from a correctly placed bracket matters even more.

Mistake #2: Choosing the wrong mount (wall vs. ceiling) for your wall type. Plaster and older walls are common in Williamsburg, and they don’t behave like drywall. A wall mount seems straightforward, but if your wall has lathe and plaster beneath the surface, a standard anchor can crumble the material. Ceiling mounting is often the smarter move in older homes: it avoids damage to plaster or older walls entirely, and it gives a clean, floor-to-ceiling look that makes rooms feel taller. Ceiling mounts also work beautifully for heavy blackout curtains because the weight hangs straight down instead of pulling forward on the wall. If you do need a wall mount, use toggle bolts or molly bolts rated for plaster, and never assume a stud finder will work reliably—old wiring and metal mesh can confuse it. A pro who knows the quirks of these homes can spot the right approach instantly.

Mistake #3: Assuming your home is level. This is the silent killer of good curtain hanging. In a hundred-year-old house, floors sag, ceilings dip, and window frames tilt. If you mount brackets using a level on the rod alone, the curtains will still hang crooked because the ceiling or floor isn’t square. The trick is to keep everything level even in older, uneven homes by using a long level across both brackets, not just the rod. Measure from the floor to each bracket point, not from the ceiling. And if the window itself is crooked, let the rod be level—your eye forgives a tilted window, but a tilted rod screams “off.” Secure, level curtain rods make everything feel more finished, and that small adjustment transforms a room from “good enough” to “done right.”

For renters in Williamsburg, these issues are magnified. Many homes near William & Mary and along the historic district have plaster walls, quirky electrical wiring, and windows that have settled over decades. Trying to hang heavy blackout curtains in a bedroom with a sloped ceiling and old plaster is a recipe for frustration—and potential wall damage that risks your security deposit. That’s why services like curtain hanging that account for these specifics are so valuable. A knowledgeable installer brings the right anchors, a long level, and the experience to decide between wall and ceiling mount before touching a drill.

I've watched people relax the moment a room finally feels finished—the fan is balanced, the lights are right, the curtains hang straight. That shift from tension to ease is what I'm chasing on every job.

So what’s the takeaway? Avoid the three common pitfalls: don’t center rods blindly, choose your mount based on your wall’s material, and always check level against the floor. Whether you tackle the job yourself or call in a local pro, the result should be curtains that hang evenly, securely, and without a trace of damage. In a rental, that peace of mind is everything. And when that rod is straight and the fabric falls clean, you’ll feel the difference the moment you walk in the room.